Sienna FWD V6-3.5L (2GR-FE) (2009)
Power Door Lock Actuator: Testing and Inspection
Front Door Lock
DOOR LOCK: FRONT DOOR LOCK: INSPECTION
INSPECTION
1. INSPECT FRONT DOOR W/ MOTOR LOCK ASSEMBLY LH
(a) Apply battery voltage to the door lock and check operation of the motor.
OK:
HINT: If the result is not as specified, replace the door lock assembly.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
HINT: If the result is not as specified, replace the door lock assembly.