Sienna FWD V6-3.5L (2GR-FE) (2009)
Rear Door Window Glass Weatherstrip: Service and Repair
Removal
EXTERIOR: REAR DOOR GLASS WEATHERSTRIP: REMOVAL
REMOVAL
1. REMOVE REAR WINDOW SIDE GARNISH ASSEMBLY
2. REMOVE REAR DOOR WINDOW FRAME SUB-ASSEMBLY
3. REMOVE SIDE TRIM BOARD COVER REAR See: Doors, Hood and Trunk/Doors/Sliding Door/Service and Repair/Slide Door (w/o Power
Slide Door)/Disassembly
4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Sliding Door/Service and Repair/Slide Door
(w/o Power Slide Door)/Disassembly
5. REMOVE REAR DOOR GLASS RUN
6. REMOVE SLIDE DOOR WINDOW ASSEMBLY See: Doors, Hood and Trunk/Doors/Sliding Door/Service and Repair/Slide Door (w/o Power
Slide Door)/Disassembly
7. REMOVE REAR DOOR GLASS WEATHERSTRIP
(a) Put protective tape under the rear door glass weatherstrip.
(b) Using a screwdriver or moulding remover, remove the rear door glass weatherstrip.
HINT: Tape the screwdriver tip before use.