Sienna FWD V6-3.5L (2GR-FE) (2009)
Wheel Speed Sensor: Testing and Inspection
Rear Speed Sensor
BRAKE CONTROL: REAR SPEED SENSOR (for 2WD): INSPECTION
INSPECTION
1. INSPECT REAR SPEED SENSOR
(a) Disconnect the skid control sensor connector.
(b) Measure the resistance between terminals 1 and 2 of the skid control sensor connector.
OK:
Resistance
less than 2.2 kOhms
(c) Measure resistance between each of terminals 1 and 2 of the skid control sensor connector and body ground.
OK:
Resistance
1MOhms or higher