Sienna FWD V6-3.5L (2GR-FE) (2009)
(a) Disconnect the cooling fan ECU connector.
(b) Detach the clamp.
16. REMOVE RADIATOR UPPER SUPPORT SUB-ASSEMBLY
(a) Remove the 4 bolts and radiator upper support sub-assembly.
17. DISCONNECT NO. 2 OIL COOLER OUTLET TUBE SUB-ASSEMBLY
(a) Disconnect the No. 1 oil cooler inlet and No. 1 oil cooler outlet hoses from the No. 2 oil cooler outlet tube sub-assembly.
(b) Disconnect the No. 1 transmission oil cooler hoses from the radiator.
(c) Remove the 2 bolts and No. 2 oil cooler outlet tube sub-assembly.
18. REMOVE HEADLIGHT ASSEMBLY RH
(a) Use the same procedures for the RH side and LH side.
HINT: See: Lighting and Horns/Headlamp/Service and Repair/Removal and Replacement/Removal
19. REMOVE RADIATOR SIDE DEFLECTOR RH