Sienna FWD V6-3.5L (2GR-FE) (2009)
27. REMOVE NO. 2 RADIATOR SUPPORT
(a) Remove the 2 bolts and No. 2 radiator support from the radiator.
28. DISCONNECT INLET SUB-ASSEMBLY
(a) Disconnect the inlet hose from the radiator.
(b) Remove the bolt and inlet sub-assembly from the radiator.
Installation
2GR-FE COOLING: RADIATOR: INSTALLATION
INSTALLATION
1. CONNECT INLET SUB-ASSEMBLY
(a) Connect the inlet hose to the radiator.
(b) Install the inlet sub-assembly to the radiator with the bolt.
Torque: 7.1 Nm (72 kgf-cm, 63in-lbf)
2. INSTALL NO. 2 RADIATOR SUPPORT