Sienna FWD V6-3.5L (2GR-FE) (2009)
(b) Connect the VVT sensor connector.
5. INSTALL INTAKE AIR SURGE TANK ASSEMBLY See: Powertrain Management/Computers and Control Systems/Knock Sensor/Service and
Repair/Installation
6. INSTALL AIR CLEANER CASE SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Installation
7. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
8. INSTALL NO. 1 AIR CLEANER INLET See: Service and Repair/Removal and Replacement/Installation
9. INSTALL NO. 2 AIR CLEANER INLET See: Service and Repair/Removal and Replacement/Installation
10. ADD ENGINE COOLANT See: Cooling System/Coolant/Service and Repair
11. INSPECT FOR ENGINE COOLANT LEAK See: Cooling System/Testing and Inspection
12. INSPECT FOR ENGINE OIL LEAK See: Engine Lubrication/Engine Oil/Service and Repair/Replacement
13. INSTALL V-BANK COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Installation
14. INSTALL FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Installation
15. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
HINT: See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation