Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-1640005.png)
(a) Disengage the 2 claw fittings and the clamp and remove the cooler thermistor No. 1.
2. REMOVE COOLING UNIT MOTOR SUB-ASSEMBLY WITH FAN
(a) Remove the 3 screws and the cooling unit motor sub-assembly w/ fan.
3. REMOVE BLOWER RESISTOR TRANSISTOR ASSEMBLY
(a) Remove the 2 screws and the blower resistor transistor assembly.
4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
(a) Disengage the claw fitting and remove the 3 screws and blower case.
(b) Remove the 2 screws and the 2 clamps.
