Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-1663005.png)
(c) Remove the 5 screws and the air conditioner amplifier assembly.
5. REMOVE INTEGRATION CONTROL AND PANEL BULB (for Manual Air Conditioning System)
(a) Remove the integration control & panel bulb.
6. REMOVE HEATER BLOWER SWITCH (for Manual Air Conditioning System)
(a) Remove the 3 nuts, and the 3 washers.
(b) Release the 6 claw fittings and remove the 5 screws and printed wire integration board sub-assembly.
(c) Remove the screw and the heater blower switch.
7. REMOVE PRINTED WIRE INTEGRATION BOARD SUB-ASSEMBLY (for Automatic Air Conditioning System)
