Sienna FWD V6-3.5L (2GR-FE) (2009)
License Plate Lamp: Service and Repair
Removal
LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: REMOVAL
REMOVAL
1. REMOVE BACK DOOR GARNISH CENTER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Back
Door/Disassembly
2. REMOVE BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Back
Door/Disassembly
3. REMOVE BACK DOOR SIDE GARNISH RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Back
Door/Disassembly
4. REMOVE BACK DOOR STRAP COVER
5. REMOVE BACK DOOR PULL STRAP See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Back
Door/Disassembly
6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Back
Door/Disassembly
7. REMOVE BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE
8. REMOVE LICENSE PLATE LIGHT ASSEMBLY
(a) Release the 2 claw fittings and disconnect the license plate light assembly.
(b) Disconnect the connector and remove the license plate light assembly.