Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-514004.png)
(a) Disconnect the E5 ECM connector.
(b) Disconnect the C10 combination meter connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance (Check for short):
Standard resistance (Check for Short):
(d) Reconnect the ECM connector.
(e) Reconnect the combination meter connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (COMBINATION METER - ECM)
OK -- REPLACE COMBINATION METER ASSEMBLY
