Sienna FWD V6-3.5L (2GR-FE) (2009)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Removal
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE ROOF HEADLINING ASSEMBLY
HINT: Refer to the instructions for REMOVAL of the ROOF HEADLINING See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Removal.
3. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Remove the bolt.
(b) Disconnect the connector and remove the tire pressure warning receiver assembly.