Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-573002.png)
Replacement
AXLE: REAR AXLE HUB BOLT: REPLACEMENT
REPLACEMENT
HINT: Replace the RH side using the same procedures as for the LH side.
1. REMOVE REAR WHEEL
2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH
(a) Separate rear disc brake caliper assembly LH for 2WD and disk rear brake type See: Wheel Hub/Service and Repair/Removal and
Replacement/Rear Axle Hub and Bearing/Removal.
3. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH
(a) Separate rear disc brake caliper assembly LH for 4WD and disk rear brake type See: Wheel Hub/Service and Repair/Removal and
Replacement/Rear Axle Hub and Bearing/Removal.
4. REMOVE REAR DISC
(a) Remove rear disc for disk rear brake type.
5. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY
(a) Remove rear brake drum sub-assembly for drum rear brake type.
6. REMOVE REAR AXLE LH HUB BOLT
