Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-1457001.png)
Power Distribution Module: Service and Repair
Installation
OTHER SYSTEM: VOLTAGE INVERTER: INSTALLATION
INSTALLATION
1. INSTALL VOLTAGE INVERTER ASSEMBLY
(a) Install the voltage inverter assembly with the 2 bolts.
Torque: 5.4 Nm (55 kgf-cm, 47in-lbf)
NOTICE: Tighten the bolts in order shown in the illustration to in the voltage inverter assembly.
2. INSTALL QUARTER TRIM FRONT PANEL ASSEMBLY LH
3. INSTALL BACK DOOR SCUFF PLATE
4. INSTALL BACK DOOR WEATHERSTRIP
5. INSTALL REAR DOOR WEATHERSTRIP LH
6. INSTALL REAR DOOR SCUFF PLATE LH
