Sienna FWD V6-3.5L (2GR-FE) (2009)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE DLC3 BRANCH WIRE OR CONNECTOR
OK -- Continue to next step.
4. CHECK FOR SHORT IN CAN BUS WIRES (JUNCTION CONNECTOR - NETWORK GATEWAY ECU MAIN BUS WIRE)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
Result:
C -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (JUNCTION CONNECTOR - NETWORK
GATEWAY ECU)
B -- CHECK FOR SHORT IN CAN BUS WIRES (JUNCTION CONNECTOR - CAN JUNCTION CONNECTOR MAIN BUS
WIRE)
A -- Continue to next step.
5. CHECK FOR SHORT IN CAN BUS WIRES (JUNCTION CONNECTOR - ECM MAIN BUS WIRE)