Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-881018.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE SKID CONTROL ECU BRANCH WIRE OR CONNECTOR
OK -- REPLACE ABS & TRACTION ACTUATOR ASSEMBLY
14. CHECK FOR SHORT IN CAN BUS WIRES (STEERING ANGLE SENSOR BRANCH WIRE)
(a) Disconnect the steering angle sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE STEERING ANGLE SENSOR BRANCH WIRE OR CONNECTOR
OK -- REPLACE STEERING ANGLE SENSOR
