Sienna FWD V6-3.5L (2GR-FE) (2009)
Fuel Injector: Service and Repair
Removal
2GR-FE FUEL: FUEL INJECTOR: REMOVAL
REMOVAL
1. DISCHARGE FUEL SYSTEM PRESSURE
HINT: See: Service Precautions/Technician Safety Information/Precaution.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE NO. 1 ENGINE UNDER COVER
4. DRAIN ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
5. REMOVE FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
6. REMOVE FRONT WIPER ARM RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
7. REMOVE FRONT WIPER ARM LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal
8. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
9. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Removal
10. REMOVE NO. 1 COWL TOP TO COWL BRACE INNER
(a) Remove the 2 bolts and the No. 1 cowl top to cowl brace inner.
11. REMOVE COWL TOP PANEL SUB-ASSEMBLY OUTER FRONT
(a) Remove the wire harness clamp.
(b) Disconnect the fuel pump resistor connector.
(c) Remove the 7 bolts and the cowl top panel outer front.
12. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Removal
13. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
(a) Disconnect the 3 vacuum hoses.