Sienna FWD V6-3.5L (2GR-FE) (2009)
Fuel Gauge Sender: Testing and Inspection
2GR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION
INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
(a) Disconnect the connector from the fuel sender gauge.
(b) Check that the float moves smoothly between F and E.
(c) Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.
Standard resistance: Fuel sender gauge:
HINT: If the value is not as specified, replace the fuel sender gauge assembly.