Sienna FWD V6-3.5L (2GR-FE) (2009)
(b) Install the 2 bolts, 2 clamps, and nut.
Torque: 8.3 Nm (84 kgf-cm, 73in-lbf)
4. INSTALL INTAKE AIR SURGE TANK ASSEMBLY See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
6. ADD ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. INSPECT FOR ENGINE COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection
9. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation
10. INSTALL COWL TOP PANEL SUB-ASSEMBLY OUTER FRONT See: Fuel Delivery and Air Induction/Fuel Injector/Service and
Repair/Installation
11. INSTALL NO. 1 COWL TOP TO COWL BRACE INNER See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Installation
12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
13. INSTALL FRONT WIPER ARM LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation
14. INSTALL FRONT WIPER ARM RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation