Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-734001.png)
Engine Control Module: Pinout Values and Diagnostic Parameters
2GR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: TERMINALS OF ECM
TERMINALS OF ECM
1. SFI SYSTEM
HINT: The standard normal voltage between each pair of the ECM terminals is shown in the table below. The appropriate conditions for
checking each pair of the terminals are also indicated.
The check results should be compared with the standard normal voltage for that pair of terminals, listed in the "Specified Condition" column.
The illustration above can be used as a reference to identify the ECM terminal locations.
