Sienna FWD V6-3.5L (2GR-FE) (2009)
(d) Check that there is no looseness in the installation parts of the side airbag sensor LH.
(e) Connect the connector to the side airbag sensor LH.
2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
HINT: See: Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Outer Belt Assembly/Installation
3. INSTALL CENTER PILLAR GARNISH LOWER LH
HINT: See: Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Outer Belt Assembly/Installation
4. INSTALL LAP BELT OUTER ANCHOR COVER LH
5. INSTALL REAR DOOR WEATHERSTRIP LH
6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
7. INSTALL FRONT DOOR SCUFF PLATE LH
HINT: See: Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Outer Belt Assembly/Installation
8. INSTALL REAR DOOR SCUFF PLATE LH
HINT: See: Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Outer Belt Assembly/Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. PERFORM INITIALIZATION
(a) Perform initialization.
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.
11. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.