Sienna FWD V6-3.5L (2GR-FE) (2009)
Remote Switch: Service and Repair
Removal
AUDIO / VISUAL: STEERING PAD SWITCH: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Steering Pad/Removal
2. REMOVE STEERING WHEEL NO. 2 LOWER COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal
3. REMOVE STEERING WHEEL NO. 3 LOWER COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Removal
4. REMOVE HONE BUTTON ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal
5. REMOVE STEERING PAD SWITCH LH
(a) Disconnect the connector.
(b) Disconnect the connector of cruise control main switch.
(c) Remove the screw.
(d) w/o Laser radar cruise control:
(1) Release the 2 pin fittings and remove the steering pad switch LH.
(e) w/ Laser radar cruise control:
(1) Remove the clamp.
(f) w/ Laser radar cruise control:
(1) Release the 2 pin fittings and release the steering pad switch LH from steering wheel.
(g) w/ Laser radar cruise control: