Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-278001.png)
Combination Switch: Testing and Inspection
LIGHTING: TURN SIGNAL LIGHT SWITCH: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT TURN SIGNAL FLASHER CIRCUIT
(a) Measure voltage between the terminals as shown in the chart below.
Voltage:
(b) Connect the connector to turn the signal flasher and turn the ignition switch ON, and inspect the wire harness side connector from the back side
as shown in the chart.
Voltage:
