Sienna FWD V6-3.5L (2GR-FE) (2009)
(e) Connect the connector to the rear airbag sensor LH.
2. INSTALL AIR DUCT ASSEMBLY
3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear
Seat Outer Belt Assembly/Installation
4. INSTALL LAP BELT OUTER ANCHOR COVER
5. INSTALL BACK DOOR SCUFF PLATE
HINT: See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat Outer Belt Assembly/Installation
6. INSTALL BACK DOOR WEATHERSTRIP
HINT: See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat Outer Belt Assembly/Installation
7. INSTALL REAR DOOR WEATHERSTRIP RH
HINT: See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat Outer Belt Assembly/Installation
8. INSTALL REAR DOOR SCUFF PLATE RH
HINT: See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat Outer Belt Assembly/Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. PERFORM INITIALIZATION
(a) Perform initialization.
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.
11. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.