Sienna FWD V6-3.5L (2GR-FE) (2009)
(a) Install the starter with the 2 bolts.
Torque: 37 Nm (380 kgf-cm, 26ft-lbf)for bolt
(b) Connect the starter connector.
(c) Install the terminal nut and cover the nut with the cap.
Torque: 9.8 Nm (100 kgf-cm, 7ft-lbf)for nut
2. INSTALL NO. 1 AIR CLEANER INLET
(a) Install the No. 1 air cleaner inlet with the bolt.
Torque: 5.0 Nm (51 kgf-cm, 44in-lbf)
3. INSTALL AIR CLEANER BRACKET
(a) Remove the 2 bolts and air cleaner bracket.
Torque: 7.8 Nm (80 kgf-cm, 69in-lbf)
4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation
5. INSTALL AIR CLEANER FILTER ELEMENT See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Installation
6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and
Repair/Installation
7. INSTALL NO. 2 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Installation
8. INSTALL BATTERY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Installation