Sienna FWD V6-3.5L (2GR-FE) (2009)
Starter Motor: Testing and Inspection
Starter
2GR-FE STARTING: STARTER: INSPECTION
INSPECTION
1. INSPECT STARTER ASSEMBLY
NOTICE: These tests must be performed within 3 to 5 seconds to avoid burning out the coil.
(a) Perform the pull-in test.
(1) Disconnect the lead wire from terminal C.
(2) Connect the battery to the magnetic switch as shown in the illustration. Check that the clutch pinion gear extends.
If the clutch pinion gear does not move, replace the magnetic switch.