Sienna FWD V6-3.5L (2GR-FE) (2009)
10. DISCONNECT PRESSURE FEED TUBE ASSEMBLY
(a) Remove the clip and disconnect the return tube assembly from the power steering gear assembly.
(b) Using SST, disconnect the pressure feed tube assembly from the power steering gear assembly.
SST: 09023-12701
(c) Remove the bolt and separate the tube clamp.
(d) Remove the nut and separate the tube clamp.
11. REMOVE RACK & PINION POWER STEERING GEAR ASSEMBLY
(a) Remove the 2 bolts, nuts and the power steering gear assembly.
NOTICE: Do not damage the 2 pressure tubes.
Installation