Sienna FWD V6-3.5L (2GR-FE) (2009)
(a) Using SST, separate the brake tube from the flexible hose.
SST: 09023-00101
(b) Remove the clip and flexible hose.
HINT: Remove the RH side by the same procedures as the LH side.
38. REMOVE REAR AXLE CARRIER BUSH LH
(a) Place matchmarks on the 2 notches of the bushing and rear axle beam assembly.
(b) Using a chisel and hammer, bend the 2 portions of the bushing rib.
HINT: Bend the bushing rib until the claw of SST can be hung.
(c) Using SST, remove the bushing from the rear axle beam assembly.
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04020
09955-04051
09957-04010
09958-04011
SST: 09950-60010
09951-00630
NOTICE: If there is a scratch on the axle beam, paint it.
39. REMOVE REAR AXLE CARRIER BUSH RH
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04020
09955-04051
09957-04010
09958-04011
SST: 09950-60010
09951-00630
HINT: Remove the RH side by the same procedures as the LH side.