Sienna FWD V6-3.5L (2GR-FE) (2009)
Axle Beam: Service and Repair
Installation
SUSPENSION: REAR AXLE BEAM: INSTALLATION
INSTALLATION
1. INSTALL REAR AXLE BEAM DAMPER
(a) Install the rear axle beam damper to the rear axle beam assembly.
2. INSTALL REAR AXLE CARRIER BUSH LH
(a) Align the matchmarks on the axle beam assembly with the 2 notches of a new bushing and temporarily install the bushing to the rear axle beam
assembly.
(b) Using SST, install the bushing to the axle beam.
SST: 09710-04101
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04020
09955-04051
09957-04010
09958-04011
SST: 09950-60010
09951-00620
NOTICE:
-
Hang the claw of SST to the bushing securely.
-
Do not scratch the rubber portion of the bushing.
-
Do not deform the bushing rib.
3. INSTALL REAR AXLE CARRIER BUSH RH
SST: 09710-04101
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04020
09955-04051
09957-04010
09958-04011
SST: 09950-60010
09951-00620
HINT: Install the RH side by the same procedures as the LH side.
4. INSTALL REAR BRAKE TUBE FLEXIBLE HOSE