Sienna FWD V6-3.5L (2GR-FE) (2009)
3. INSTALL COWL TOP PANEL SUB-ASSEMBLY OUTER FRONT
(a) Install the cowl top brace and cowl top panel sub-assembly outer front with the 9 bolts.
Torque: 7.5 Nm (76 kgf-cm, 66in-lbf)
(b) Connect the wire harness to the cowl top panel sub-assembly outer front.
4. INSTALL WINDSHIELD WIPER MOTOR & LINK ASSEMBLY
HINT: See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Components
5. INSTALL FR WIPER ARM LH
HINT: See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Components
6. INSTALL FR WIPER ARM RH
HINT: See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Components
7. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76ft-lbf)
8. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
HINT: See: Alignment/Service and Repair
Components
SUSPENSION: REAR COIL SPRING: COMPONENTS
COMPONENTS
ILLUSTRATION