Sienna FWD V6-3.5L (2GR-FE) (2009)
HINT: Loosen the RH side by the same procedures as the LH side.
-
When loosening the bolt, hold the nut not to rotate.
-
Do not remove the bolt and nut.
18. SEPARATE SHOCK ABSORBER ASSEMBLY REAR LH
(a) Support the rear axle beam assembly with a jack.
(b) Remove the bolt and separate the shock absorber assembly rear LH.
19. SEPARATE SHOCK ABSORBER ASSEMBLY REAR RH
HINT: Separate the RH side by the same procedures as the LH side.
20. REMOVE COIL SPRING REAR LH
(a) Apply a shop rug between the coil spring rear LH and rear axle beam assembly.
(b) Apply a shop rug between the coil spring rear RH and rear axle beam assembly.
(c) Remove the coil spring LH by slowly lowering the jack.
21. REMOVE REAR COIL SPRING INSULATOR UPPER LH