Sienna FWD V6-3.5L (2GR-FE) (2009)
(a) Loosen the lock nut.
NOTICE:
-
Do not loosen the nut except for the purpose of disassembling the shock absorber assembly front LH with coil spring.
-
Do not remove the lock nut.
(b) Remove the bolt, and disconnect the front flexible hose No.1 and speed sensor front LH.
(c) Remove the 2 nuts and 2 bolts on the lower side of the front shock absorber with coil spring.
NOTICE: When removing the bolt, hold the nut not to rotate.
(d) Remove the 3 nuts on the upper side of the front shock absorber with coil spring.
(e) Remove the front shock absorber with the coil spring.
Installation
SUSPENSION: FRONT SHOCK ABSORBER WITH COIL SPRING: INSTALLATION
INSTALLATION
1. INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING
(a) Install the front shock absorber with coil spring as shown in the illustration.