Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-1558010.png)
(e) Remove the rear spring bumper No.1 LH from the shock absorber assembly rear LH.
Installation
SUSPENSION: REAR SHOCK ABSORBER: INSTALLATION
INSTALLATION
1. INSTALL SHOCK ABSORBER ASSEMBLY REAR LH
(a) Install the rear spring bumper No.1 LH to the shock absorber assembly LH.
(b) Support the rear axle beam assembly with a jack.
(c) Install the rear shock absorber assembly rear LH, cushion retainer and nut to the rear axle beam.
(d) Install the rear shock absorber cushion No.1 and rear shock absorber LH cushion retainer.
(e) Temporary tighten a new lock nut.
(f) Using a 6mm hexagon wrench to hold the piston rod, fully tighten the lock nut.
