Sienna FWD V6-3.5L (2GR-FE) (2009)
09727-00031
NOTICE: Do not use an impact wrench. It will damage the SST.
HINT: Use 2 SST of the same type.
(b) Install the front coil spring LH to the shock absorber assembly front LH.
HINT: Fit the front coil spring insulator lower LH into the gap of the shock absorber assembly front LH.
5. INSTALL FRONT COIL SPRING INSULATOR UPPER LH
(a) Install the front coil spring insulator upper LH as shown in the illustration.
6. INSTALL FRONT COIL SPRING SEAT UPPER LH
(a) Install the front coil spring seat upper LH to the shock absorber assembly front LH with the mark facing to the outside of the vehicle.
7. INSTALL FRONT SUSPENSION SUPPORT LH BEARING
(a) Install the front suspension support LH bearing.
8. INSTALL FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH
(a) Install the front suspension support sub-assembly LH with the mark facing to the outside of the vehicle.
(b) Temporarily tighten a new lock nut.