Sienna FWD V6-3.5L (2GR-FE) (2009)
(c) Using a new gasket, install the oil pan to the transaxle case with the 18 bolts.
Torque: 7.8 Nm (80 kgf-cm, 69in-lbf)
NOTICE: Apply seal packing to the bolts and tighten them within 10 minutes of application.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. ADD AUTOMATIC TRANSAXLE FLUID
6. INSPECT AUTOMATIC TRANSAXLE FLUID See: Service and Repair/Procedures
7. INSTALL ENGINE UNDER COVER NO.1
8. RESET MEMORY
HINT: See: Transmission Control Systems/Testing and Inspection/Programming and Relearning