Sienna FWD V6-3.5L (2GR-FE) (2009)
(a) Using a screwdriver, remove the front drive shaft LH hole snap ring.
12. REMOVE FRONT DRIVE SHAFT DUST COVER LH
(a) Using SST and a press, remove the drive shaft dust cover LH.
SST: 09950-00020
NOTICE: Be careful not to drop the inboard joint assembly.
13. REMOVE FRONT DRIVE SHAFT DUST COVER RH (for 2WD)
(a) Using a press, remove the drive shaft dust cover RH.
14. REMOVE FRONT DRIVE SHAFT DUST COVER RH (for 4WD)
(a) Using SST and a press, remove the drive shaft dust cover RH.
SST: 09950-00020
NOTICE: Be careful not to drop the inboard joint assembly.
15. REMOVE FRONT DRIVE SHAFT DUST COVER