Sienna FWD V6-3.5L (2GR-FE) (2009)
Wiper Switch: Service and Repair
Removal
WIPER AND WASHER: WIPER SWITCH: REMOVAL
REMOVAL
1. REMOVE STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Using a screwdriver, disengage the claw and pull out the windshield wiper switch assembly.
NOTICE: The claw will be broken if pressed hard.
HINT: Tape up the screwdriver tip before use.