Sienna LE V6-3.0L (1MZ-FE) (1998)
/Page-1922001.png)
Door Switch: Testing and Inspection
INSPECT FRONT AND SLIDE DOOR COURTESY SWITCH CONTINUITY
a. Check that continuity exists between terminals and the switch body with the switch ON (switch pin released: opened door).
b. Check that no continuity exists between terminals and the switch body with the switch OFF (switch pin pushed in: closed doors).
If operation is not as specified, replace the switch.
INSPECT BACK DOOR COURTESY SWITCH CONTINUITY
a. Check that continuity exists between terminals and the switch body with the switch ON (switch pin released: opened door).
b. Check that no continuity exists between terminals and the switch body with the switch OFF (switch pin pushed in: closed doors).
If operation is not as specified, replace the switch.
