Sienna LE V6-3.0L (1MZ-FE) (1998)
/Page-314001.png)
Alignment: Service and Repair
Rear
INSPECTION
1. MEASURE VEHICLE HEIGHT.
NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to the specification.
2. INSPECT CAMBER.
HINT: Camber is not adjustable. If the measurement is not within the specifications, inspect the suspension parts for damaged and/or worn-out
and replace them if necessary.
Measuring Point Reference
3. INSPECT TOE-IN.
If the toe-in is not within the specification, inspect and replace the suspension parts as necessary.
