Sienna LE V6-3.0L (1MZ-FE) (1998)
Fuel Injector: Testing and Inspection
Injection Inspection
INSPECTION
1. INSPECT INJECTOR INJECTION
CAUTION: Keep injector clear of sparks during the test.
(a) Connect SST (union and hose) to the fuel filter outlet with the 2 gaskets and union bolt. SST 0926-41047 (90405-09015)
Torque: 29 N.m (300 kgf.cm, 22 ft.lbf)
HINT: Use the vehicle's fuel filter.
(b) Install the grommet and O-ring to the injector.
(c) Connect SST (union and hose) to the injector and hold the injector and union with SST (clamp). SST 09268-41047 (09268-41100)
(d) Put the injector into a graduated cylinder.
HINT: Install a suitable vinyl hose onto the injector to prevent gasoline from splashing out.
(e) Connect the TOYOTA hand-held tester to the DLC3.