toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Sensors and Switches - Brakes and Traction Control > < Sunroof / Moonroof Limit Switch|Testing and Inspection
Page 1
background image

Sunroof / Moonroof Switch: Testing and Inspection

INSPECT SLIDING ROOF CONTROL RELAY AND SWITCH CIRCUIT

Disconnect the connector from the relay and switch and inspect the connector on the wire harness side, as shown in the chart.
If the circuit is as specified, replace the relay and switch.

Sensors and Switches - Brakes and Traction Control > < Sunroof / Moonroof Limit Switch|Testing and Inspection