toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Alignment|Front|Page 5621 > < Alignment|Front|Page 5619
Page 4
background image

Rack end length difference: 1.5 mm (0.059 inch) or less

d. Torque the tie rod end lock nuts.

Torque: 74 Nm (55 ft. lbs.) 

e. Place the boot on the seat and install the clip it.

HINT:  Make sure that the boots are not twisted.

7. INSPECT WHEEL ANGLE.

Turn the steering wheel fully, and measure the turning angle. 

 

If the wheel angles differ from the specification, check the left and right rack end lengths.

Alignment|Front|Page 5621 > < Alignment|Front|Page 5619