Sienna LE V6-3.0L (1MZ-FE) (1998)
3. If necessary, replace 2 bearings.
a. Using a brass bar and hammer, tap out the bearing from the rack housing.
b. Using SST 09950-60010 (09951-00260), 09950-70010 (09951-07200), press out the bearing from the rack housing.
c. Coat a new bearing with molybdenum disulfide lithium base grease.
d. Using SST 09950-60010 (09951-00310), 09950-70010 (09951-07200), press in the bearing.
e. Coat a new bearing with molybdenum disulfide lithium base grease.
f.
Using SST 09950-60010 (09951-0320), 09950-70010 (09951-07200), press in the bearing.
4. If necessary, replace oil seal.