Sienna LE V6-3.0L (1MZ-FE) (1998)
Transmission Temperature Sensor/Switch: Service and Repair
ON-VEHICLE REPAIR
1. REMOVE Automatic Transmission Fluid (ATF) TEMPERATURE SENSOR
a. Disconnect the connector.
b. Remove the ATF temperature sensor.
c. Remove the O-ring from the ATF temperature sensor.
2. INSTALL ATF TEMPERATURE SENSOR
a. Install a new O-ring to the ATF temperature sensor.
b. Install the ATF temperature sensor.
Torque: 34 Nm (350 kgf.cm, 25 ft. lbs.)
c. Connect the connector.