Sienna LE V6-3.0L (1MZ-FE) (1998)
c. Remove the bolt and shift solenoid valve SL.
d. Remove the O-ring from the solenoid.
14. INSTALL SOLENOID VALVES
a. Coat new O-ring with ATF and install them to the solenoid.
b. Install the shift solenoid valve SL and bolt.
HINT: The bolt length is indicated in the illustration.
Torque: 6.6 Nm (67 kgf.cm, 58 inch lbs.)
c. Install the No.1, No.2 solenoid valves and 3 bolts.
HINT: Each bolt length is indicated in the illustration.
Torque: 6.6 Nm (67 kgf.cm, 58 inch lbs.)
15. INSTALL 2ND BRAKE APPLY GASKET
16. INSTALL VALVE BODY
a. While holding the cam down with your hand, slip the cable end into the slot.
b. Bring valve body into place.