Solara V6-3.3L (3MZ-FE) (2004)
B.
Remove the two (2) screws and visor.
3.
Remove the RH visor assembly.
A.
Using the molding remover disengage the three (3) claws and remove the cover.
B.
Remove the two (2) screws and visor.
4.
Remove the visor holder by turning it counterclockwise.
5.
Remove the map lamp assembly.
A.
Using a screwdriver disengage the four (4) claws and remove the lens.
Tape the screwdriver tip before use.
B.
Remove the two (2) screws and map lamp.