Solara V6-3.3L (3MZ-FE) (2004)
/Page-974001.png)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Actuator Assembly (W/O VSC)
BRAKE ACTUATOR ASSY (W/O VSC)
REPLACEMENT
1. DRAIN BRAKE FLUID
NOTICE: Wash brake fluid off immediately if it adheres to any painted surface.
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE BRAKE ACTUATOR WITH BRACKET
a. Release the latch of the brake actuator connector to disconnect the connector.
b. Using SST, disconnect the 6 brake tubes from the brake actuator.
SST 09023-00100
c. Use tags or make a memo to identify the reconnection points.
