Solara V6-3.3L (3MZ-FE) (2004)
/Page-473002.png)
Standard
If the result is not as specified, replace the relay.
3. INSPECT ECT SWITCH (NO. 1)
a) Check the resistance.
Standard
If the result is not as specified, replace the switch.
NOTICE: When checking the ECT switch in the water, the terminals should be kept dry. After the check, dry the switch.
4. INSPECT ECT SWITCH (NO. 2)
a) Check the resistance.
Standard
If the result is not as specified, replace the switch.
NOTICE: When checking the ECT switch in the water, the terminals should be kept dry. After the check, dry the switch.
