Solara V6-3.3L (3MZ-FE) (2004)
a) Remove the oil pressure gauge.
b) Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
c) Using a 24 mm deep socket wrench, install the oil pressure switch.
Torque: 15 Nm (152 kgf-cm, 11 ft. lbs.)
NOTICE: Do not start the engine for at least 1 hour after installation of the switch.
d) Connect the oil pressure switch connector.
8. START ENGINE AND CHECK FOR ENGINE OIL LEAKS