Solara V6-3.3L (3MZ-FE) (2004)
12. INSTALL COOLER CONDENSER ASSY
a. Install the cooler condenser assy with the 2 nuts.
Torque: 9.8 Nm (100 kgf.cm, 85 in.lbf)
13. INSTALL RADIATOR SUPPORT UPPER
14. INSTALL COOLER REFRIGERANT LIQUID PIPE A
a. Remove the attached vinyl tape from the tube and connecting part of the cooler condenser assy.
b. Sufficiently apply compressor oil to a new O-ring and pipe joint.
Compressor oil: ND-OIL 8 or equivalent
c. Install the O-ring to the cooler refrigerant liquid pipe A.
d. Connect the cooler refrigerant liquid pipe A to the cooler condenser assy with the bolt.
Torque: 5.4 Nm (55 kgf.cm, 47 in.lbf)
15. INSTALL COOLER REFRIGERANT DISCHARGE HOSE NO.1
a. Remove the attached vinyl tape from the tube and connecting part of the cooler condenser assy.
b. Sufficiently apply compressor oil to a new O-ring and hose joint.
Compressor oil: ND-OIL 8 or equivalent
c. Install the O-ring to the cooler refrigerant discharge hose No.1.
d. Connect the cooler refrigerant discharge hose No.1 to the cooler condenser assy with the bolt.
Torque: 5.4 Nm (55 kgf.cm, 47 in.lbf)
16. CHARGE REFRIGERANT