Solara V6-3.3L (3MZ-FE) (2004)
Low Tire Pressure Indicator: Service and Repair
IF THE LOW TIRE PRESSURE WARNING LIGHT COMES ON OR BLINKS WHILE DRIVING, DO THE FOLLOWING.
Low Tire Pressure Warning Light
If the warning light comes on:
1. Adjust the tire inflation pressure to the specified level as soon as possible.
Tire Pressure Warning System Reset Switch
2. Push the tire pressure warning system reset switch for approximately one second and make sure the warning light goes off.
If the light remains on after the reset switch has been pushed, have the tire pressure warning system checked.
If you have a flat tire, replace it with the spare tire.
If the warning light blinks slowly (every 0.5 seconds) the low tire pressure warning system may be malfunctioning.
If the warning light blinks rapidly (every 0.25 seconds) the low tire pressure warning system needs to be initialized.
Reset the system with the tire pressure warning system reset switch.
TIRE PRESSURE WARNING SYSTEM RESET SWITCH
Tire Pressure Warning System Reset Switch
The tire pressure warning system needs to be initialized in the following conditions:
-
When the Low Tire Pressure Warning Light blinks every 0.25 seconds
-
After replacing or rotating tires or wheels
When initializing the system, the present tire condition is stored as a standard.
To initialize the system, perform the following:
1. Park the vehicle at a safe place and apply the parking brake. Stop the engine.
2. Adjust the pressure of all the installed tires to the specified level.
3. Turn the ignition key to "ON".
If the Low Tire Pressure Warning Light blinks, push the reset switch for a few seconds and make sure the warning light goes off.